搜索
NEWS CENTER
WONDERFUL
/
/
/
What are the technical requirements for titanium tubes?

What are the technical requirements for titanium tubes?

(Summary description)The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc. Many nuclear power industries use titanium tubes as standard tubes for their units.

What are the technical requirements for titanium tubes?

(Summary description)The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc. Many nuclear power industries use titanium tubes as standard tubes for their units.

Information
The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc. Many nuclear power industries use titanium tubes as standard tubes for their units.
 
skills requirement:
1. The chemical composition of titanium and titanium alloy pipes shall comply with the provisions of GB/T3620.1. When the buyer re-inspects, the allowable deviation of the chemical composition of Mingkun Titanium Industry shall comply with the provisions of GB/T3620.2.
2. The allowable deviation of the outer diameter of the pipe should meet the requirements in Table 1.
3. The allowable deviation of the wall thickness of the pipe should not exceed ±12.5% of its nominal wall thickness. The allowable deviation of the wall thickness of the pipe does not apply to the welding seam of the titanium welded pipe.
4. The length of the pipe should meet the requirements in Table 2.
5. The fixed length or multiple length of the pipe should be within the range of its indefinite length, the allowable deviation of the fixed length is +10mm, and the multiple length should also be included in the incision amount when the pipe is cut, and each incision should be 5mm. .

Scan the QR code to read on your phone

News

Wandefu Titanium Alloy Project Officially Signed
Wandefu Titanium Alloy Project Officially Signed
See more information 白箭头 黑箭头
Titanium alloy rods, TC4 titanium alloy rods from ingots to finished rods are usually completed in three stages
1. Billet Its initial forging (blanking) temperature is 150-250°C above the β transformation point, at this time, the plasticity of the casting structure is good. At the beginning, light and fast blows should be used to deform the ingot until the primary coarse-grained structure is broken. The degree of deformation must be kept within the range of 20% to 30%. The ingot is forged to the desired cross-section and then cut to size blanks.
See more information 白箭头 黑箭头
Analysis of processing technology of titanium alloy parts
Analysis of processing technology of titanium alloy parts Titanium alloys have excellent mechanical properties but poor process properties, which leads to the contradiction that their application prospects are promising but processing is difficult. By analyzing the metal cutting performance of titanium alloy materials, combined with many
See more information 白箭头 黑箭头

Committed to be your reliable supplier of titanium alloy plates, rods and precision parts

Home     About us     Prodcut     News     Equipment     Contact

Tel:0514-87130358 E-mail:YZWDF88@VIP.163.COM Add:Hanjiang District, Yangzhou City

Yangzhou Wonderful Electromechanical Equipment Complete Engineering Co., Ltd. 苏ICP备19040660号-1 SEO
Yangzhou Wonderful Electromechanical Equipment Complete Engineering Co., Ltd.
苏ICP备19040660号-1 SEO